Drills & Screwdrivers Makita

Use for models DA301 / 6012D A angle drill 7.2 V voltage Sold individually Manufacturer: Makita Werkzeug GmbH

Cordless Impact Wrench / 1/4 inch internal hexagon / Electronic Speed Regulation / Safety Features Overload Protection / 2-speed / 140 Nm Max. Torque / Blow Count (max.) 3,900 counts/min

Makita DFT127FMZ 14.4V Brushless Screwdriver (Body Only) The Makita DFT127FMZ is a 1.4V Body Only Screwdriver fitted with a Brushless Motor. It has a 1/4 inch hex drive and a torque range of 5 to 12 Newton metres. Compatible with Makita BL1415N or BL1430B batteries.Sold without a battery or charger in a plain cardboard box. Features: Electric brake Torque adjust tool for anti-tamper torque adjustment. It is impossible to adjust torque without this tool. Variable speed Soft start Constant speed control Forward / reverse rotation LED job light Brushless motor Ergonomically designed handle Programmable speed control Maintenance Alarm Poka-yoke (mistake proofing) wireless external transmitter

Makita-built 4-pole motor delivers 121 in.lbs. of Max Torque Variable speed (0-1,800 RPM) for a wide range of drilling and driving applications 3/8" keyless chuck for fast and easy bit installation and removal Compact 3-1/2" angle head height for use in close quarters Compact and ergonomic design at only 12-3/8" long

Cordless Drill Impact Driver / 1,400 rpm Idle Speed (max.) / Max Torque (Hard) 24 Nm / Torque Levels 16 / Technical Specifications Speed Preselection / Security Feature Electric Brake / 18 V

Makita HP2070 13mm 2-Speed Percussion Drill The Makita HP2070 percussion drill features a powerful 1010W motor and 2 speed options for you to choose from depending on the application and material. The new reversing system prevents speed reduction of the motor in reverse rotation. It will drill up to 40mm in wood and 20mm in masonry. Features: Torque-limiter stops bit rotation when hitting reinforcement The new reversing system allows improved brush life and no power reduction in reverse Forward/reverse rotation 2 mechanical gears Torque limiter: The drill stops when the bit hits against reinforcements Variable speed - ideal for various materials Anti Vibration System Double Insulation Comes

Large, flat plates Fit on the base of the Planer Allows for uniform cutting width Suitable for use with Makita KP0810 and KP0800 Planer

Cordless Drill Impact Driver / 1,400 rpm Idle Speed (max.) / Max Torque (Hard) 42 Nm / 18 V

Cordless Impact Wrench / 1/2 inch external square / Anti Vibrations / Safety Features Motor Break / 4-speed / 700 Nm Max. Torque

The Makita DA4031 2 speed, reversible 13mm keyed chuck angle drill has an impressive 1050w motor with drilling speeds of 300rpm in the low gear and 1200rpm in the high gear. When drilling large holes it is always advisable to use the machine in the low gear as this is where you will achieve the highest torque, for this reason Makita have fitted the DA4031 with a torque limiter to the first gear for the user's safety when drilling large holes. Makita's DA4031 13mm (1/2") Angle Drill is Suited for pro's close-quarter works in corners, between joists or studs and smoothly drilling large holes for pipe or conduit. Fitted with an adjustable angle top handle and side handle for the users comfort,

Designed to enable the tying of large diameter rebars Applicable rebars: D16 x D16 – (D13 x 2) x (D16 x 2) Approximate tie wire: annealed wire 0.8mm (21 Ga), galvanised wire 0.8mm (21 Ga), poly coated wire 0.9mm (20 Ga) Trigger lock function and torque adjustment Extension handle is available separately to allow operation in a standing position 6 stage adjustable tying strength Two mode settings. single actuation and continuous actuation Main switch with auto power off and automatic rebar tying Maximum tying capacity: maximum of 4 rebars D16 (#5) x 2 x D13 (#4) x 2. compatible with thick rebars (D22 x D25) Not compatible with G-Series batteries

Cordless Combi Hammer / 1-speed / Impact Force 2.8 Joule / 980 rpm Idle Speed (max.) / Blow Count (max.) 5,000 counts/min / Battery Operation / Technical Specifications LED Light / Security Feature Electric Brake / SDS-Plus / 5.1 kg

The Makita DCE090ZX1 Brushless LXT Power Cutter has a powerful 36V DC motor drive system that is driven by 2 x 18V Li-ion batteries (not supplied). A lock-off button ensures safe operation and an indicator lamp will warn of overload. There is also an electric brake and Active Feedback Sensing Technology which acts to shut down the tool if a sudden decrease in rotation speed occurs. An incorporated LED job light ensures your work is clearly illuminated and the tool also offers a range of safety features. A secure battery cover protects the battery from water during wet cutting tasks. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed 6,600/min. Max. Wheel Diameter 230mm

Cordless Combi Hammer / 1-speed / Impact Force 2 Joule / 950 rpm Idle Speed (max.) / Blow Count (max.) 4,700 counts/min / Battery Operation / Technical Specifications Electronic Speed Control / Security Feature Overload Protection / SDS-Plus / 3.4 kg

Cordless Hammer Drill / Impact Force 2 Joule / 1,100 rpm Idle Speed (max.) / Blow Count (max.) 4,000 counts/min / Battery Operation / 3.5 kg

Combi Hammer / Impact Force 3 Joule / 980 rpm Idle Speed (max.) / Blow Count (max.) 5,000 counts/min / Battery Operation / Technical Specifications Brushless Motor / Security Feature Dust Cover / SDS-Plus