Drills & Screwdrivers Makita

The Makita HP1641 Percussion Drill has a dual purpose for Rotation only and Rotation with Hammering (with keyless drill chuck). The new reversing system allows extended service life of carbon brush no power reduction even in reverse rotation. Variable speed control via a larger trigger gives the user more control. An in-line positive grip design maximises power thrust. Specification Input Power 680W No Load Speed 0-2,800/min. Impact Rate 0-44,800/bpm Capacity Steel 13mm, Masonry 16mm, Wood 30mm Weight 2.0kg All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration Drilling 2 m/sec Vibration Hammer Drilling 19 m/sec Vibration K Factor 2 m/sec

Without battery, without charger XPT - Extreme Protection Technology. Optimum protection against dust and splashes of water, even under harsh conditions Deep discharge protection. The device automatically switches off when the battery is almost empty.

Cordless Impact Wrench / 1/4 inch external square / LED Light / Safety Features Motor Break / 3-speed / 175 Nm Max. Torque / Blow Count (max.) 3,800 counts/min

Cordless Hammer Drill / 1-speed / Impact Force 2 Joule / 950 rpm Idle Speed (max.) / Blow Count (max.) 4,700 counts/min / Battery Operation / SDS-Plus / 3.3 kg

Cordless Impact Wrench / 1/2 inch external square / 4-speed / 630 Nm Max. Torque / Blow Count (max.) 4,000 counts/min

Cordless Drill Driver / 2,100 rpm Idle Speed (max.) / Max Torque (Hard) 130 Nm / Technical Specifications Brushless Motor / 18 V

Cordless Hammer Drill / Impact Force 2 Joule / 1,100 rpm Idle Speed (max.) / Blow Count (max.) 4,000 counts/min / Battery Operation / 3.5 kg

This cordless drill combines a hammer action and drill driver function allowing us to drill through materials such as concrete, brick, wood, metal or plastic. This combi drill also features a High efficiency brushless motor, 2 mechanical gears, LED Job light, battery protection circuit and an electric brake. Max Torque: 35Nm Chuck Capacity: 0.8mm-10mm Drilling Capacity (Steel): 10mm Drilling Capacity (Wood): 28mm Drilling Capacity (Masonry): 8mm No Load Speed: 0-1,500rpm Blows per minute: 0-22,500bpm Voltage: 10.8V

Makita TD110DZ 10.8V CXT Impact Driver With 2 x 2Ah Batteries, Charger, Case & Inlay

Angle Drill / 450 Watt / 2,400 rpm Idle Speed (max.) / Mains Operation / Keyless / 1.4 kg

Makita DTW1002RGJ Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive with 2 x 6.0Ah Batteries, Charger and Makpac Type 3 Connector Case The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000Nm, this machine certainly has plenty of grunt due to the high powered brushless motor and newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow and afterglow function for working in dark areas and 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Features: Electric brake Variable speed control trigger Reverse switch …

Makita-built motor delivers up to 245 in.Lbs. Of max torque Variable speed (0-1, 100 RPM) for a wide range of drilling and driving applications Compact and ergonomic design at only 12-3/8" long Weighs only 2.7 lbs. With battery for reduced operator fatigue Ergonomic barrel grip design for added comfort

Cordless Drill Driver / 1,400 rpm Idle Speed (max.) / Max Torque (Hard) 70 Nm / 18 V

The Makita DHP487 LXT Combi Drill has a powerful brushless motor and 2 mechanical gears. Variable speed is controlled via a trigger. It also offers forward/reverse rotation.The combi drill is fitted with the best possible ergonomic handle for drill-driver applications. It has a single sleeve keyless chuck for easy bit installation/removal with only one hand. There is also an electric brake and an LED job light. Supplied as a Bare Unit - No Battery or Charger. Specifications: Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/0-1 700/min.Impact Rate: 0-7 500/0-25 500/bpm.Max. Torque: 40Nm.Torque Settings: 20 + Drill.Max. Drilling Capacity: Metal 13mm Wood 36mm Masonry 13mm.Weight:

Cordless Impact Wrench / Ergonomic Handle / Safety Features Motor Break / 4-speed / 350 Nm Max. Torque / Blow Count (max.) 4,000 counts/min

This cordless impact driver is small, compact yet extremely powerful The DTD152 is a small yet powerful impact driver, capable of producing up to 2900rpm and 3500ipm. It also features variable speed control so you can tailor the speed to the application. Other features of this model include a battery protection circuit for long life, LED job light for illumination of dark work areas and forward/reverse rotation. Complete with 1 x 5.0Ah battery, charger and MakPac case. Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design …

Cordless Impact Wrench / LED Light / Safety Features Overload Protection / 4-speed / 330 Nm Max. Torque / Blow Count (max.) 4,000 counts/min