United Kingdom

Speakers

 prices on 4189 models  
Show
42.90Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Compatible for use with bolt (flange) fitted compression drivers. Features embedded elastomer side panels that make it acoustically inert. Type: PA Made in: China
42.90Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Carrying case for X-SUB 115SA. Colour: Black Suitable for: X-SUB 115SA Material: Nylon
Get more out of your SONOS PLAY 1 and PLAY 3. Integrate your SONOS speaker seamlessly into your interior design by mounting it anywhere on your furniture with the Vogels SOUND 4113 table-top mount. Th more→e wide turn (360 degrees) and tilt (10 degrees down) capacity makes sure that you can always angle your speaker to sound best.
Speakers Fluid Audio F5
monitor, kit 2.0, active, 140 W, 49 – 22000 Hz

43.20Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Padded soft gig bag for Voicesolo FX150 personal PA & vocal processor, made with durable nylon construction, that features spacious outer pocket for microphone, cables and other accessories, and easy- more→carry handle padded and shoulder strap. Black colour. Made in: China
43.49Buy!
£
Tradeinn.com
Delivery: in United Kingdom
Report
Portable speaker with telescopic handle and wheels, with bluetooth + USB / MP3 function. It has wireless microphone / remote control and has 4 to 8 hours of autonomy.
The AudioQuest Forest digital optical cable features a low-dispersion fibre conductor for low-jitter and is ideal for connecting all manner of devices from TVs to Sky+ HD boxes computers media streame more→rs Blu-Ray players and games consoles.
44.00Buy!
£
AV.com
Delivery: in United Kingdom
Report
Premium Wall Mount For Sonos Amp. Precisely crafted in high grade steel allowing you to have confidence in its secure hold of your Sonos amp. Can also be rear mounted to your television using VESA Mounts.
44.20Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Replacement 12” guitar speaker from Originals series that can be found inside the back of a standard 4 x 12 cabinet. This speaker performs well with any playing style, and will not break the bank. It more→is equipped with a 3.9” ceramic magnet and 1.5” round copper voice coil, fitted into a pressed-steel chassis. Cut-out diameter: 283 mm. Diameter: 309 mm. Mounting slot dimensions: 4 x 7.9 mm Ø. Mounting slot PCD: 297 mm. Overall depth: 122 mm. Weight: 2.0 kg. Sensitivity: 95 dB Diameter: 12" Impedance: 8 Ohm Weight: 2 kg Sensitivity (dB): 95.0 Power (Watt): 50.0 Type: Guitar Loudspeaker Power: 50 W Diameter (inch): 12.0 Frequency Range: 85 Hz - 5 kHz Made in: Hong Kong
44.50Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Easy to install Cushioning Adjustable arm structure Universally adjustable height Maximum height: 2.20 m
44.52Buy!
£
Boxed2me.co.uk
Delivery: in United Kingdom
Report
CC Series 2 Way 100V Ceiling Speakers2-way quick fit ceiling speakers with PP mica bass driver and directional dome tweeter giving an excellent frequency response, all housed in a white polymer frame more→with metal grille.DetailsDispersion angle 160°
44.92Buy!
£
Boxed2me.co.uk
Delivery: in United Kingdom
Report
BM-series Wall-Mount 100V Background SpeakersIndoor wall speakers with moulded polypropylene cabinets and powder-coated steel grilles. Supplied with a steel bracket for mounting to an appropriate wall more→or ceiling surface. Moulded enclosures and efficient driver components offer a cost-effective solution for multi-speaker installations, with options for 8 Ohms or 100V line operation. Designed for general purpose indoor PA and background music systems.DetailsMaterial PP cabinet with powder coated steel grilleInput 4mm binding posts (+/-)Tweeter 12mmØ (0.5") dome tweeter
44.92Buy!
£
Boxed2me.co.uk
Delivery: in United Kingdom
Report
BP5V-W 100V 5.25" background speaker whiteA range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket. Weatherproof desi more→gn makes these speakers ideal for outdoor music and public address applications.Water resistant PP cone main driverRotary selector switch for 100V line tappings or 8 Ohms operationWall mounting bracket suppliedAlternative M6 threaded mounting pointsSupplied singly1m hard-wired speaker cable connectedColour - WhiteWoofer - 130mm (5.25'') polypropylene coneTweeter - 25mm (1'') balanced domeFrequency response - 100Hz - 20kHzPower max. : 8 Ohms - 90WPower rms : 8 Ohms - 45WSPL @ 1W/1m - 89dBTappings …
44.92Buy!
£
Boxed2me.co.uk
Delivery: in United Kingdom
Report
BP5V-B 100V 5.25" background speaker blackA range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket. Weatherproof desi more→gn makes these speakers ideal for outdoor music and public address applications.Water resistant PP cone main driverRotary selector switch for 100V line tappings or 8 Ohms operationWall mounting bracket suppliedAlternative M6 threaded mounting pointsSupplied singly1m hard-wired speaker cable connectedColour - BlackWoofer - 130mm (5.25'') polypropylene coneTweeter - 25mm (1'') balanced domeFrequency response - 100Hz - 20kHzPower max. : 8 Ohms - 90WPower rms : 8 Ohms - 45WSPL @ 1W/1m - 89dBTappings …
AudioQuest Jitterbug (Full Metal Jacket Edition) USB Data & Power Noise Filter Many tens of thousands of music lovers are already enjoying better audio enabled by the AudioQuest JitterBug USB Noise Fi more→lter—whether plugged into a car’s USB jack, or a laptop computer, or a USB “service-only” jack on an Ethernet Streamer, etc… Now, JitterBug FMJ, with its Full Metal Jacket raises the stakes. Whether used in series (in-line) or in parallel, JitterBug significantly reduces contamination from RF generated by a computer, car, or other device—JitterBug FMJ also thoroughly addresses environmental RF Noise taking advantage of this vulnerable interface. The new metal …
45.00Buy!
£
AV.com
Delivery: in United Kingdom
Report
The Bowers & Wilkins PMKC6 is a pre-mount kit for the six inch in-ceiling speakers. This serves as a guide for the position and size of your speaker unit while you are constructing a wall. The guide i more→s simply fixed between beams with the template positioned where you want your speaker to be. Then sheets of plaster board or other wall materials can have the shape cut out for your speaker and placed over the frame. With this kit you can create a fully seamless integrated home audio system.
45.00Buy!
£
AV.com
Delivery: in United Kingdom
Report
Optional grille for the Dali E-9F Subwoofer this robust fabric grille is 26cm in diameter. The Dali logo inset on a small aluminium square.
The IsoAcoustics OREA Graphite Equipment Isolation Puck is perfect for isolating electronics like DACs CD players turntables and even smaller devices like preamps or phono stages. Wed recommend using more→three to six OREA Graphite Pucks capable of supporting products with a maximum weight of 10.8kg combined. Each puck supports up to 1.8kg with no more than six pucks recommended beneath your electronics at once. Use four pucks for equipment up to 7.2kg or create a triangle base with three pucks for equipment up to 5.4kg. The strong suction cup-like design adheres to your equipment easily providing superior decoupling and isolation. Patented technology enhances bass response system clarity and three-dimensional …
45.00Buy!
£
AV.com
Delivery: in United Kingdom
Report
The CFB3-KIT retrofit installation kit for the CF230 cleverly provides a firm fixing behind plasterboard/Sheetrock and requires just three screws to complete the fit.
45.00Buy!
£
AV.com
Delivery: in United Kingdom
Report
The Mountson Premium Sonos Port Wall Mount expands your sound system and upscales your music listening experience. Constructed with high steel grade the Mountson wall mount ensures brilliant longevity more→you can even add your own padlock (not included) to confirm your Sonos Ports stability. The flexible positioning allows your Sonos Port to be placed on your wall from various angles so you can connect it to all of your audio devices. The Sonos Port effortlessly slides into the Mountson wall mount allowing for quick installation.
Speakers Polk Audio RTi A1
0
0
0
1
homemade, kit 2.0, passive, 8 Ohm, 50 – 27000 Hz, bass reflex, Bi-Amping/Wiring

The Mountson Premium Floor Stand is perfect for holding Sonos One One SL and Play:1 speakers. Its tight-fitting design and interchangeable rubber and spiked feet ensure that your speaker can be positi more→oned securely. Constructed from precision extruded aluminium and laser-cut steel and colour-matched with the speakers themselves it maintains the premium look and feel. It is quick and easy to install and places the speaker at the perfect listening height ideal for home listening or as part of a 5.1 surround sound system. The stand allows for cables to be concealed from view leaving a slick wireless look. Please note: Images are for demonstration purposes only. There are no speakers supplied with …
45.90Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Cover for SUBline 112 Series made from hard wearing wipeable nylon, this soft lined padded cover will protect the SUBline 112 while on the road. Material: Nylon Suitable for: FBT Subline 112 Colour: B more→lack Water Resistance: No Padding: None Type: Dust Cover
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Brand rating 
All brandsMain brands
Colour
Features
Features (for household)
Mount
Type
Number of channels
Bands
Acoustic design
Features
Rated power
more
Minimum frequency
Maximum frequency
Impedance
Sensitivity
Inputs
Outputs
Subwoofer
Body shape (embedded)
Bass reflex
Finishing material
Width (main speaker)
Height (main speaker)
Depth (main speaker)