Circuit Breakers

The double cage terminals of the SN201 installation circuit breaker allow for easy mounting of the circuit breaker. The SN201 circuit breaker achieves maximum safety through the wide opening of the ei more→der. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you will always know the status of the contacts. ABB SN circuit breakers are available in different variants.

This Resi9 series circuit breaker from Schneider Electric features 4 poles, 2 of which are protected (2p+2n). In addition, the circuit breaker has a rated voltage of 230V, a rated current of 16A and a more→tripping characteristic B. The short-circuit breaking capacity is 6kA. Furthermore, the Schneider Electric Resi9 circuit breaker has a mounting depth of 44mm.

Single-pole miniature circuit breaker with C-characteristic tripping curve, rated at 16 amperes with 10 kiloampere breaking capacity. Part of the DLS 6i series, this circuit protection device is desig more→ned for industrial and commercial electrical installations requiring high short-circuit protection.

This Halyester power rail coupler is suitable for 3-pole switch fuse boxes with a current rating of 250 amps, where the branch strip is placed above the main rails. This coupler comes in the PEN or N more→variant and has a size of 35 square millimeters.

Low-voltage miniature circuit breaker (MCB) with 2-pole protection, featuring 4A nominal current and C-curve tripping characteristic. Offers 20kA breaking capacity at 230V AC and 10kA at 400V AC (IEC/ more→EN 60947-2). Features IP20 terminal protection, upgradable to IP40 when mounted in modular enclosure. DIN rail mountable with remote position indication capability.

This EC circuit breaker is the narrow version of the EC116CN circuit breaker. The Geyer EC circuit breaker features top and bottom connection terminals. The connection terminals at the bottom are equi more→pped with captive screws for connecting the terminal rail or flexible wiring up to a maximum of 25mm². Due to an installation length of only 82 mm, the Geyer EC circuit breaker has approximately 20-20% more wiring space. In addition, this Geyer circuit breaker is touch-safe. Geyer EC circuit breakers are available in several variants.

This Halyester power rail coupler is suitable for 3- and 4-pole switchgear with a current rating of 160 amps, where the branch strip is placed above the main rails. This coupler comes in the PEN or N more→variant and measures 20 by 4 millimeters.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

The double cage clamps of the SN201 L installation circuit breaker provide easy mounting of the circuit breaker. The SN201 L circuit breaker achieves maximum safety through the wide opening of the eid more→er. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you always know the status of the contacts. ABB SN L circuit breakers are available in different variants.

Schneider Electric Acti 9 IC40 circuit breaker, tripping characteristic B, co-switching neutral, nom. (measuring) current 6A, voltage type AC, 2 poles (total), width in module units 1, secondary devic more→e possible, connectable conductor cross-section duck 1 - 16mm², 1 protected poles.

Hager KB comb rail, gray, diameter 10mm², length 210mm, rated continuous current Iu 63A, suitable for devices with zero yellow, serving series(s) 4p. Circuit breakers, design electrical connection pin more→, 3 phases, suitable for number of devices 3, 4 poles, width in module units 12.

Gb2 thermal magnetic circuit breakers. Din rail mounted, mechanically reset protection devices. Short circuit and overload protection for control circuits and associated industrial equipment, e.g. sol more→enoid valves, electric brakes and transformers, etc. Rated operational voltage of 415v. 74mm high; depth 67mm (1p) 70mm (2p). Standards. Iec947-2.

Schneider Electric GB2 circuit breaker, tripping characteristic other, nom. (measuring) current 4A, voltage type AC, 2 poles (total), width in module units 2, connectable conductor cross-section duck more→0.75 - 6mm², 2 protected poles, nom. (measuring) voltage 415V.

Schneider Electric GB2 circuit breaker, tripping characteristic other, nom. (measuring) current 6A, voltage type AC, 2 poles (total), width in module units 2, connectable conductor cross-section duck more→0.75 - 6mm², 2 protected poles, nom. (measuring) voltage 415V.

The Geyer EC circuit breaker features top and bottom connection terminals. The connection terminals at the bottom are equipped with captive screws for connecting the terminal rail or flexible wiring u more→p to a maximum of 25mm². Due to an installation length of only 82 mm, the Geyer EC circuit breaker has approximately 20-20% more wiring space. In addition, this Geyer circuit breaker is touch-safe. Geyer EC circuit breakers are available in several variants.

Schneider Electric GB2 circuit breaker, tripping characteristic other, nom. (measuring) current 2A, voltage type AC, 2 poles (total), width in module units 2, connectable conductor cross-section duck more→0.75 - 6mm², 2 protected poles, nom. (measuring) voltage 415V.

The schneider electric 10a miniature circuit breaker has a 60hz of network frequency and it used type a class. It has instantaneous protection time delay of earth leakage and it used 1p + n poles. Its more→net weight is 120g and it used toggle for control and it is in white colour. Rated operational voltage 230 v ac. Network type is ac. Rated insulation voltage is 400 v ac.

Schneider Electric Acti 9 IC40 circuit breaker, tripping characteristic C, co-switching neutral, nom. (measuring) current 32A, voltage type AC, 2 poles (total), width in module units 1, secondary devi more→ce possible, connectable conductor cross-section duck 1 - 16mm², 1 protected poles.

The SC203 circuit breaker from ABB can be easily mounted in the distributor. Thanks to the contact position indicators (CPI) on the circuit breaker's rocker switch, you always know the status of the c more→ontacts. ABB SC circuit breakers are available in different variants.

Wohner CRITO power rail adapter, connection busbar copper 10x15.5x0.8mm, connection round cable cores 3x 35 - 120mm², version electrical connection round conductor, adapter width 81mm, width rail 10mm more→, diameter connection terminal 35 - 120mm, center distance rail 60mm, max. Current rail thickness 10mm.

This iC60N circuit breaker has a visi-trip window. This signaling of shutdown due to a fault by a red mechanical status indicator is on the front of the automaton. The green strip on the switch of the more→Acti 9 iC60 circuit breaker ensures that the contacts are physically open and that work can be performed on the downstream circuit in complete safety. In addition, this Schneider Electric circuit breaker features a double clip for disassembly while the comb rail is still in place.

Eaton Halyester LV systems LV switchgear. Branch str. SLH/SRH/VKH 160 L123.

Schneider Electric Acti 9 IC40 circuit breaker, tripping characteristic B, co-switching neutral, nom. (measuring) current 25A, voltage type AC, 2 poles (total), width in module units 1, secondary devi more→ce possible, connectable conductor cross-section duck 1 - 16mm², 1 protected poles.