Speakers Celestion

Loudspeaker-type low-frequency 8” driver that provides 94dB sensitivity and 100Wrms (AES standard) power handling. It features a pressed steel chassis, a ferrite magnet, a Kevlar loaded paper cone and a 1.75” high temperature copper voice coil wound on polyimide former for increased reliability. It achieves optimal performance in compact enclosures and delivers an exceptional performance through bass and mid-range – it is ideal for two-way systems. Nominal impedance: 8 Ohm. Frequency range: 70 Hz-6 kHz. Unit weight: 2.3 kg.
Power (Watt): 200.0
Power RMS (Watt): 100.0
Power: 200 W
Тype: PA
Power RMS: 100 W
Made in: China
Impedance: 8 Ohm
Frequency Range: 70 Hz - 6 kHz
Weight: 2,3 kg
Sensitivity: 94 dB…

Featuring a unique neodymium magnet assembly engineered to deliver pure Celestion tonality, the Neo V-Type delivers the familiar and addictive modern vintage sound of the V-Type, but with a weight reduction of almost 50%.This sweet sounding speaker has a superbly balanced sonic signature that imparts a vintage musicality to your tone. Clean sounds have just the right amount of upper-mid chime and HF sparkle to add clarity and definition. Crank it up for a sizzling overdrive and some raw rhythmic grind, but expect a little extra definition and note separation for your searing, single note lead lines thanks to some neodymium magnet magic.
Impedance: 8 Ohm
Diameter: 12"
Made in: China
Тype: Guitar L…

Replacement 12” guitar speaker from Classic series that has evolved over the decades but still retains its essential, sought- after tone – for example Angus Young has been a Greenback devotee since the early days of AC/DC. This model is voiced with additional broad mid-range attack and restrained top-end to give a forward, punchy attitude to chords and a searing lead tone without fizz. With its well-controlled low-end it can be used singly in low-powered amps, or in multiples for high-power rock heads. It is an ideal speaker to bring drive and definition to modern high gain amps, equipped with a 5.9” ceramic magnet and 1.75” round copper voice coil, fitted into a pressed-steel chassis. Cut-out…

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power RMS: 75 W
Тype: PA
Impedance: 8 Ohm
Made in: China
Power: 150 W
Power RMS (Watt): 75.0
Power (Wat…

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Power RMS (Watt): 300.0
Тype: Speaker unit
Diameter (inch): 10.0
Frequency Range: 60 Hz - 5 kHz
Power (Watt): 600.0
Magnet Type: Ferrite
Made in: China
Diameter: 10"
Power RMS: 300 W
Weight: 5,5 kg
Power: 600 W
Impedance: 8 Ohm
Sensitivity: 99 dB

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Impedance: 16 Ohm
Power RMS: 40 W
Тype: PA
Power: 80 W
Made in: China
Diameter: 1"
Sensitivity: 110 dB
Frequency Range: 1200 Hz - 20 kHz
Power (Watt): 80.0
Magnet Type: Ferrite
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Weight: 3,0 kg…

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power (Watt): 80.0
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Frequency Range: 1200 Hz - 20 kHz
Weight: 0,75 kg
Impedance: 8 Ohm
Power RMS: 40 W
Power: 80 W
Diameter: 1"
Magnet Type: Neodymium
Sensitivity: 110 dB
Тype: PA
Made in: China

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Frequency Range: 800 Hz - 20 kHz
Weight: 0,75 kg
Power RMS (Watt): 50.0
Diameter (inch): 1.0
Power (Watt): 100.0
Power RMS: 50 W
Made in: China
Sensitivity: 107 dB
Тype: PA
Magnet Type: Neodymium
Diameter: 1"
Power: 100 W
Impedance: 8 Ohm

Very lightweight, low-profile ferrite magnet compression driver with power rating of 15 W RMS (30 W continuous) and nominal impedance of 8 Ohm. It utilizes the Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design and is ideal for entry-level two-way and three-way sound reinforcement cabinets. The driver is equipped with a 1” voice coil made of copper clad aluminium with PETP film diaphragm and surround material. It is supplied with partial phase plug assembly (for applications where outer phase plug and horn form single moulding as part of front baffle). Frequency range: 1.5 kHz-20 kHz. Sensitivity: 107 dB. Mounting information: width – 90 mm, depth – 52…

Celestion Blue Guitar Speaker, 15 Ohm
Diameter (inch): 12.0
Sensitivity (dB): 100.0
Power (Watt): 15.0
Magnet Type: Alnico
Weight: 4,2 kg
Тype: Guitar Loudspeaker
Sensitivity: 100 dB
Power: 15 W
Impedance: 15 Ohm
Made in: Great Britain
Diameter: 12"
Frequency Range: 75 Hz - 5 kHz