Speakers IMG Stageline

Compact active PA module consisting of a preamplifier, a power amplifier and a mains supply unit. Speaker systems can easily be extended to active speaker systems. Just screw the module onto the rear side of the speaker cabinet and connect the speaker connection cable to the speaker input. Inputs: 1 x XLR, balanced, jack/2 x RCA, unbalanced Outputs: Speaker cable for connecting 4-8Ω speaker systems Other features: Level control, short-circuit proof, protected against overheating Technical Specification RMS output power 45WRMS 30WRMS Music output power 60WMAX 40WMAX THD < 0.01% Intermodulation - Output impedance 4-8Ω Frequency range 15-50,000Hz Power bandwidth - Input impedance 20kohm bal., 11kohm unbal. Input voltage 0.4V S/N ratio > 80dB Quiescent current - Power supply 230V~/50Hz/90VA Recommended heat sink (min.) - Req. panel cutout - Dimensions 212x190x52mm …

PAB-6WP High Performance Weatherproof PA Speaker 100W The IMG Stageline PAB-6WP High Performance Weatherproof PA speakers come with IP classification. Exactly the right speakers whenever a high sound quality, a high volume capability and a respective resistance to all weather condictions are required. Ideally suited for permanent open-air applications, e.g. at fairground attractions, PA applications in pedestrian areas, at sports facilities and wherever a weather-protected installation of the speakers is not possible. Weatherproof high-performance 100V speaker system, 100WRMS in 100V operation or up to 180WMAX/100WRMS in 8Ω operation Features: Compact 2-way bass-reflex system with cabinet …

Push-on tilting adapter with mounting plate adjustable tilting angle, to be secured with locking screw. Black lacquered steel version. Mounting plate (90x105mm) with 4 mounting holes and 2 elongated holes for accepting speaker systems. Suitable for stands with a standard diameter. Max. load: 15kg. Supplied with 2 locking screws and 4 self-cutting mounting screws.

IMG Stageline PAST-500/SW Wall Support For PA Speaker Systems Wall Support For PA Speaker Systems A black lacquered finish offers a premium look. The support is movable (approx. 150°) and tiltable (approx. 30°), with removable slides. Fixing bolt for accepting e.g. PA speaker systems with stand insert as well as carrier plates and adapter plates. Distance between fixing bolt and mounting plate: 320mm Total length: 370mm Load capacity: 30kg Safety Note To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!

Professional speaker stand lightweight aluminium version, air-suspended centre column, height can be adjusted in 5 steps, with locking pin. Aluminium, black Technical Specification Max. load capacity at centr. weight concentration 40kg Mounting plate - Adjustable height 147-218cm Storage dimensions 106x15cm Weight 3.9kg

Speaker Stand Set with 2 x Aluminium Speaker Stands and Protective Carry Bag. Each Stand can taike up to 30KG Height Adjustable 140 - 200 cm Locking Pin Mechanism with 6 Height Stages

IMG Stageline PAB-506/WS Wall Mount PA Speaker 100W 4 Ohm Professional PA Speaker Cabinets In A Trapezoid High-Tech Plastic Housing The speaker systems of the 500 series have especially been designed for highest demands in professional applications. All characteristics have been optimized to the limit of technical possibilities. Smallest possible weight and extra compact size were achieved by using high-strength plastic cabinets in a design for high requirements. The use of high-quality speakers and crossover networks developed in Germany does not only guarantee an extra high efficiency but also an exceptionally exact sound. Technical Specifications: System 2-way bass-reflex Bass speaker 16cm …

IMG Stageline MS-90/SW Microphone floor stand Microphone floor stand high-quality steel version. With movable boom (74cm) and shock-absorbing folding feet. Thread: 9mm ( 3/8 "). Technical Specification Mat black lacquered Adjustable height: 105-160cm Storage dimensions: 11x98cm Weight: 2.6kg

With 35mm (1 3/8 ") standard thread, plastic, with CD design (constant directivity), especially suitable for MRD-80, effective throat: 25 mm (1"), 1, 800-18,000Hz, vert. 60° x hor. 90°, 0.6kg.