Speakers

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Impedance: 16 Ohm
Weight: 3,0 kg
Made in: China
Sensitivity: 110 dB
Power RMS (Watt): 40.0
Power: 80 W
Frequency Range: 1200 Hz - 20 kHz
Type: PA
Diameter (inch): 1.0
Power (Watt): 80.0
Diameter: 1"
Magnet Type: Ferrite
Power RMS: 40 W…

1” exit, ferrite magnet compression driver with 1.75” edge-wound copper clad aluminium voice coil and one-piece PETP diaphragm and surround that provides 40W RMS power handling (AES standard) and 110dB sensitivity. It features the Sound Castle clamping, which ensures even pressure on diaphragm assembly for reduced distortion. The Finite Element Analysis (FEA) is used to optimise both magnet assembly and acoustic design. Nominal impedance: 8 Ohm. Frequency range: 1.2-20 kHz. Unit weight: 3 kg.
Power RMS: 40 W;20 W
Diameter: 1"
Power (Watt): 80.0
Frequency Range: 1200 Hz - 20 kHz
Made in: China
Power: 40 W;80 W
Magnet Type: Ferrite
Diameter (inch): 1.0
Type: PA
Impedance: 8 Ohm
Weight: 3,0 kg…

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power: 80 W
Diameter: 1"
Type: PA
Made in: China
Power (Watt): 80.0
Power RMS: 40 W
Frequency Range: 1200 Hz - 20 kHz
Impedance: 8 Ohm
Magnet Type: Neodymium
Diameter (inch): 1.0
Weight: 0,75 kg
Power RMS (Watt): 40.0
Sensitivity: 110 dB

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Providing 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Magnet Type: Neodymium
Power: 100 W
Power RMS: 50 W
Frequency Range: 2000 Hz - 20 kHz
Power RMS (Watt): 50.0
Made in: China
Weight: 0,6 kg
Type: PA
Diameter (inch): 1.0
Power (Watt): 100.0
Impedance: 8 Ohm
Sensitivity: 108 dB
Diameter: 1"…

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Sensitivity: 107 dB
Magnet Type: Neodymium
Power (Watt): 100.0
Diameter (inch): 1.0
Power RMS: 50 W
Type: PA
Diameter: 1"
Impedance: 8 Ohm
Made in: China
Power RMS (Watt): 50.0
Power: 100 W
Weight: 0,75 kg
Frequency Range: 800 Hz - 20 kHz

The PreSonus CDL 12P Loudspeaker impressed ears around the world with its unique driver design and consistent sound reproduction. Now the CDL10P offers the same high-performance capabilities in a lightweight design perfect for touring bands and mobile DJs. Combining the best attributes of point source and line array technology the CDL10P delivers clear speech intelligibility and natural music reproduction with a highly focused pattern. This ensures consistent sound throughout the frequency range both on- and off-axis. The CDL10Ps hybrid point-source/line-array design makes it an excellent choice for both mobile and installed applications. Rigging the enclosures is made easy with the integrated …

The Chord C-digital 1RCA to 1RCA Cable is ideal for all hi-fi and AV components with a digital coaxial output including CD players streaming devices DVD players and more. Direct gold plating improves signal transfer ensuring optimal signal integrity whilst ARAY geometry oxygen-free copper conductors provide noise and interference reduced experience. The C-digital features an over moulded plug surround offering trouble-free service with zero conductor compression.

2-way quick fit ceiling speakers with PP mica bass driver and directional dome tweeter giving an excellent frequency response, all housed in a white polymer frame with metal grille.

Rotary selector switch for 100V line tappings or 8 Ohms
Fitted with "dog-ear" mounts for fixing to ceiling tiles 1-20mm in thickness
Spring loaded terminals for easy connection

Frequency response - 60Hz - 20kHz
Woofer - 200mm (8")
Tweeter - 44mm (1.75")
Power rms : 100V line - 50W
Power rms : 8 Ohms - 60W
Cutout - 238mm
Mounting depth - 95mm
SPL @ 1W/1m - 89dB (±2dB)
Tappings - 10, 20, 30, 40, 50W & 8 Ohms
Dimensions - 102 x 271mm
Weight - 1.85kg
Power max. : 8 Ohms - 120W…

Carbon Special is a new limited availability model that combines our latest engineering with cutting edge components from our reference line all housed in a moderately sized chassis. It features our third-generation carbon fibre 12" driver with a new bespoke CSP passive driver that delivers 50% longer stroke powered by our 1000 watt amplifier itself guided by our CS PerfectFilter™. An all new cabinet with highly polished metal and carbon fibre touches appears only in this model. Where previous special editions have used existing cabinets drivers and filters Carbon Special uses many elements developed solely for Carbon Special. We employed our newest back widow 12"(350mm) carbon fibre driver de…

AudioQuest keep everything simple with the Carbon Digital Coaxial cable. A further increase of silver cladding on the conductor over the Cinnamon and Forest ranges just ups the sonic performance a little and the conductor gauge itself is also enlarged from 24 AWG to 21 AWG.

AudioQuest keep everything simple with the Carbon Digital Coaxial cable. A further increase of silver cladding on the conductor over the Cinnamon and Forest ranges just ups the sonic performance a little and the conductor gauge itself is also enlarged from 24 AWG to 21 AWG.

AudioQuest keep everything simple with the Carbon Digital Coaxial cable. A further increase of silver cladding on the conductor over the Cinnamon and Forest ranges just ups the sonic performance a little and the conductor gauge itself is also enlarged from 24 AWG to 21 AWG.

CAB Series Passive CabinetsFull-range speaker cabinets housed in a compact and lightweight moulded PP enclosure. Custom designed low frequency woofers are paired with titanium compression drivers for a powerful yet balanced sound delivery. Each cabinet is fitted with top and side carrying handles and a 35mm pole mount socket. Connection from an amplifier is via Speakon lead to either of 2 sockets on the rear panel. Compact, lightweight and yet very capable sound reinforcement cabinets.DetailsDispersion 90° x 60°Connectors 2 x SPK socketHousing material Injection moulded polypropyleneImpedance 8 Ohms

Adjustable headphones with detachable microphone included.Adjustable volume.Dimensions 16x7,8x18,8 and weight 0,23 kg.150 cm cable.

The Alto Professional Busker is a premium portable battery-powered speaker that delivers powerful sound for musicians on the go. With 200W of output from its 6.5" woofer and 1" tweeter this compact and lightweight speaker is designed to be easily transported and is perfect for any stage. Featuring a built-in 3-channel mixer with Alesis FX the Busker allows you to connect your microphones and instruments without interrupting your performance. Adjust volume levels on the fly with the control knobs and add polish to your vocals or guitars with the dedicated FX processing. With Bluetooth music streaming and an Aux input you can easily connect your devices and play backing tracks or sync up with …

1 pair of Monitor Audio bronze 200 in white with light grey front

1 pair of monitor audio bronze 50 in white with light grey front
25 mm gold tweeter and 5.5 inch / 140 mm woofer made of aluminium/magnesium with ceramic coating
Low-resonance 15mm MDF housing with 21mm baffle and rear bass reflex opening
Can be combined with cheap amplifiers thanks to the high impedance of 8 ohms
5-year manufacturer's warranty and 2-year legal warranty

BP5V-B 100V 5.25" background speaker blackA range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket. Weatherproof design makes these speakers ideal for outdoor music and public address applications.Water resistant PP cone main driverRotary selector switch for 100V line tappings or 8 Ohms operationWall mounting bracket suppliedAlternative M6 threaded mounting pointsSupplied singly1m hard-wired speaker cable connectedColour - BlackWoofer - 130mm (5.25'') polypropylene coneTweeter - 25mm (1'') balanced domeFrequency response - 100Hz - 20kHzPower max. : 8 Ohms - 90WPower rms : 8 Ohms - 45WSPL @ 1W/1m - 89dBTappings …

BP3V-W 100V 3" background speaker whiteA range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket. Weatherproof design makes these speakers ideal for outdoor music and public address applications.Water resistant PP cone main driverRotary selector switch for 100V line tappings or 8 Ohms operationWall mounting bracket suppliedAlternative M6 threaded mounting pointsSupplied singly1m hard-wired speaker cable connectedColour - WhiteWoofer - 75mm (3'') polypropylene coneTweeter - 12mm (0.5'') polymer HF driverFrequency response - 120Hz - 20kHzPower max. : 8 Ohms - 60WPower rms : 8 Ohms - 30WSPL @ 1W/1m - 87dBTappings …

Customize the look of your S1 Pro+ Wireless PA System. Acoustically transparent, each cover features a high-quality zipper for a secure fit and stretchable fabric that never compromises sound quality. Update your portable PA system’s look, match the aesthetic of an event, or simply give your S1 Pro+ a unique style.
Compatible with: Bose S1 Pro+
Colour: Black
Material: Polyester

L1 Pro32 Array & Power Stand Bag
Easily transport and store your Bose L1 Pro32 portable line array with the L1 Pro32 Array & Power Stand Bag. This soft padded bag was designed specifically to carry the L1 Pro32 line array and power stand so you can have confidence that each component fits safely and securely. And there’s also extra room inside to carry microphones cables and more. Sling your L1 Pro32 over your shoulder using the comfortable strap to free up your hands — so you can get out the door and into your music in no time.

FEATURES
• Holds the Bose L1 Pro32 line array and power stand
• Padded lining and heavy-duty zipper
• Comfortable shoulder strap …

L1 Pro16 Slip Cover
Provide basic protection for your Bose L1 Pro16 power stand. The L1 Pro16 Slip Cover protects your Bose L1 Pro16 power stand from dust and minor scratches during storage or transport. Made from durable nylon it features the Bose logo embroidered on the front plus a convenient cutout that allows for easy access to the power stand’s handle.

Key features
• Designed for use with Bose L1 Pro16 power stand
• Top cutout for easy access to power stand handle
• Convenient slip-on design with Bose logo
• Made of durable nylon

Compatible products
L1 Pro16 Portable Line Array System
- Features
- Single/ Pair Single…

L1 Pro8 Slip Cover
Product Overview
As the most portable L1 Pro system the L1 Pro8 portable PA is ready whenever you are. With an eight-driver articulated C-shape line array the L1 Pro8 delivers 180-degree horizontal sound coverage making it an ideal companion for shows in small venues like coffee shops and cafes. An integrated subwoofer with a RaceTrack driver delivers powerful bass without the bulk; a built-in multi-channel mixer offers EQ reverb and phantom power plus Bluetooth? streaming and access to the full library of ToneMatch presets; and the intuitive L1 Mix app places wireless control in your hands from your smartphone. It’s an ultra-portable system with a surprising size-to-performance …