Cables (video, audio, USB)

HDMI to HDMI cable 1 8 m from approx

Breakout cables (harness/fanout) have an MPO connector at one end and a corresponding number of duplex LC connectors at the other end (4 6 8 or 12) other connectors are used but LC is by far the most more→popular option.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form-factor that is very similar in size to a duplex LC connector. Using MPO trunk and breakout cables allows much higher density cabling.

Lengths available are 1m 2m 3m 5m 10m and 20m

Breakout cables (harness/fanout) have an MPO connector at one end and a corresponding number of duplex LC connectors at the other end (4 6 8 or 12) other connectors are used but LC is by far the most more→popular option.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form-factor that is very similar in size to a duplex LC connector. Using MPO trunk and breakout cables allows much higher density cabling.

Lengths available are 1m 2m 3m 5m 10m and 20m

Our LC-ST OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher per more→forming Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied more→with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our MPO to 4X LC (DX) QSFP Breakout CPR Cca Cables (Harness/Fanout) have an MPO connector at one end and a corresponding number of LC duplex connectors at the other end (4 6 8 or 12). Other connectors more→are used but LC is by far the most popular option. These CPR Cca Breakout cables are also approved for installation into any public sector building and comply with the most stringent fire regulations.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar …

The Lanview Bendable series is engineered for flexible cable management. able to bend and sustain any angle from a straight line to 90 degrees. The boot. shaped around a single stainless-steel wire. i more→s easily adjustable by hand. while the internal wire maintains the set angle or direction.The boot's design permits repositioning at any moment or straightening for the disconnection of connectors. Its versatility guarantees ideal connector positioning in demanding situations. like confined areas or environments with high density. Lanview LVO2314705-FLEX InfiniBand/fibre optic cable 0.5 m LC Aqua colour

Our MPO to 4X LC (DX) QSFP Breakout CPR Cca Cables (Harness/Fanout) have an MPO connector at one end and a corresponding number of LC duplex connectors at the other end (4 6 8 or 12). Other connectors more→are used but LC is by far the most popular option. These CPR Cca Breakout cables are also approved for installation into any public sector building and comply with the most stringent fire regulations.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar …

Our MPO to 4X LC (DX) QSFP Breakout CPR Cca Cables (Harness/Fanout) have an MPO connector at one end and a corresponding number of LC duplex connectors at the other end (4 6 8 or 12). Other connectors more→are used but LC is by far the most popular option. These CPR Cca Breakout cables are also approved for installation into any public sector building and comply with the most stringent fire regulations.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar …

Our MPO to 4X LC (DX) QSFP Breakout CPR Cca Cables (Harness/Fanout) have an MPO connector at one end and a corresponding number of LC duplex connectors at the other end (4 6 8 or 12). Other connectors more→are used but LC is by far the most popular option. These CPR Cca Breakout cables are also approved for installation into any public sector building and comply with the most stringent fire regulations.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar …

Our LC-LC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied more→with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.

The Lanview Bendable series is engineered for flexible cable management. able to bend and sustain any angle from a straight line to 90 degrees. The boot. shaped around a single stainless-steel wire. i more→s easily adjustable by hand. while the internal wire maintains the set angle or direction.The boot's design permits repositioning at any moment or straightening for the disconnection of connectors. Its versatility guarantees ideal connector positioning in demanding situations. like confined areas or environments with high density. Lanview LVO231220-FLEX InfiniBand/fibre optic cable 20 m LC Aqua colour

Our MPO to 4X LC (DX) QSFP Breakout CPR Cca Cables (Harness/Fanout) have an MPO connector at one end and a corresponding number of LC duplex connectors at the other end (4 6 8 or 12). Other connectors more→are used but LC is by far the most popular option. These CPR Cca Breakout cables are also approved for installation into any public sector building and comply with the most stringent fire regulations.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar …

Our MPO to MPO Trunk CPR Cca Cables have a female MPO connector at each end of the cables and are ideal for creating a structured cabling system including backbone and horizontal interconnections.  more→/>
In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads cannot meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar in size to an LC duplex connector. Using MPO trunk and breakout cables allows much higher density cabling. With them also being CPR Cca rated they are approved for installation into any public sector building …

CNL 10M OM4 B12 MPO 12F Aq TRUNK M-B

Our MPO to MPO Trunk CPR Cca Cables have a female MPO connector at each end of the cables and are ideal for creating a structured cabling system including backbone and horizontal interconnections.  more→/>
In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads cannot meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar in size to an LC duplex connector. Using MPO trunk and breakout cables allows much higher density cabling. With them also being CPR Cca rated they are approved for installation into any public sector building …

Our MPO to MPO Trunk CPR Cca Cables have a female MPO connector at each end of the cables and are ideal for creating a structured cabling system including backbone and horizontal interconnections.  more→/>
In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads cannot meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar in size to an LC duplex connector. Using MPO trunk and breakout cables allows much higher density cabling. With them also being CPR Cca rated they are approved for installation into any public sector building …

Our MPO to MPO Trunk CPR Cca Cables have a female MPO connector at each end of the cables and are ideal for creating a structured cabling system including backbone and horizontal interconnections.  more→/>
In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads cannot meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar in size to an LC duplex connector. Using MPO trunk and breakout cables allows much higher density cabling. With them also being CPR Cca rated they are approved for installation into any public sector building …

The 50/125µm OM3 multimode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenanc more→e of the fiber optic cables more efficient. This 50/125 OM3 multimode fiber optic cable is ideal for connecting 10G SR. 10G LRM. SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections. The multimode patch cords are manufactured using LSZH cables which conform to IEC. EIA TIA or Telcordia standards. Lanview LVO231301 InfiniBand/fibre optic cable 2 m LC Aqua colour

The 50/125µm OM3 multimode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenanc more→e of the fiber optic cables more efficient. This 50/125 OM3 multimode fiber optic cable is ideal for connecting 10G SR. 10G LRM. SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections. The multimode patch cords are manufactured using LSZH cables which conform to IEC. EIA TIA or Telcordia standards. Lanview LVO231303 InfiniBand/fibre optic cable 2 m LC SC Aqua colour

Used for splicing fibre optical cables. Comes with ceramic zirconia ferrule. Used in telecommunication and data communication installations in high speed network. Lanview LVO231394 InfiniBand/fibre op more→tic cable 2 m LC Aqua colour

Used for splicing fibre optical cables. Comes with ceramic zirconia ferrule. Used in telecommunication and data communication installations in high speed network. Lanview LVO231399 InfiniBand/fibre op more→tic cable 2 m SC Aqua colour

The 50/125µm OM3 multimode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenanc more→e of the fiber optic cables more efficient. This 50/125 OM3 multimode fiber optic cable is ideal for connecting 10G SR. 10G LRM. SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections. The multimode patch cords are manufactured using LSZH cables which conform to IEC. EIA TIA or Telcordia standards. Lanview LVO231469 InfiniBand/fibre optic cable 1 m LC Aqua colour

The 50/125µm OM3 multimode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenanc more→e of the fiber optic cables more efficient. This 50/125 OM3 multimode fiber optic cable is ideal for connecting 10G SR. 10G LRM. SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections. The multimode patch cords are manufactured using LSZH cables which conform to IEC. EIA TIA or Telcordia standards. Lanview LVO231470 InfiniBand/fibre optic cable 3 m LC Aqua colour